Se avete una stampante 3D e nel caso specifico una #bambulab potete scaricare gratuitamente questo mio modello: https://makerworld.com/models/1342215
Fatemi sapere se va bene e se volete modifiche

My venerable #prusa MK3S+ was resurrected from its ~3-year slumber.

Updated the firmware to the most recent one, dusted off the print bed, put glue on the bed, loaded up filament, and tried to print an old GCODE from the SD card, a full-plate sheet to check for leveling.

That particular file might have been generated for the MK3 (this printer was upgraded from that model), and it threw out SEVERAL errors, either related to leveling (I suspect it might have to do with the fact that new firmware expects to only level around the part, not the whole bed) or temperature.

Sliced a #Benchy, slapped it onto the SD card, and it's now doing a ~1.5-hour print like it had never stopped a day.

I'll have to see if I can get PETG working, too. If so, I'll be able to print quite a bit more things than on an 18x18 bed

And I'll need to get a phone for it, for Octo4a.

#Průša a jeho #Prusament s dokonalým návinem. Bohužel to strčíte akorát tak na tu jejich kládu, které říkají spool holder. Cívka je tak zdeformovaná, že bude drhnout snad v čemkoli jiném. A za to chtějí 1399 Kč (polykarbonát).

Když jsem byl v knihovně se synem, na akci pro předškoláky, viděl jsem, že tam mají malého Průšu a řekl jsem si, jestli knihovna náhodou taky netrpí tím, co tady někdo z majitelů 3D tiskáren popisoval a sice že většinu času se na něj jen práší, protože není pořádně co tisknout.
Nabídl jsem se knihovně jako dobrovolník, že bych mohl dětem ukázat, jak kreslit vlastní modely v online #CAD programu #onshape.

A hádejte co, mají zájem (ostatně nemají moc co ztratit)
takže jsme se domluvili na pilotní hodině a pak uvidíme, kam dál.

As GLEW is unmaintained, uses GLX by default and the EGL part is unfinished, the best would be if projects would migrate to GLAD.

I've migrated PrusaSlicer to GLAD today.

https://github.com/prusa3d/PrusaSlicer/pull/14440

PrusaSlicer already used GLAD, the question is why it used GLEW then?

Learn a lesson from me, friendos: Do not ever clean a 3D printer nozzle with side cutters. I did this a couple weeks ago removing stuck PETG and realized immediately I messed up. Prints started stringing and had other issues only after then. I ordered replacement nozzles (obxidian!) and finally got around to swapping the nozzle and taking a closer look today. Under a microscope it's easy to see that no only did I take a chunk out of one side, the bottom is uneven.

#Prusa printers hard at work... (an additional Mini is printing too, but is not connected to the network currently).

I understand why Prusa is so late delivering the camera for the Core One. When I finally received it, the plastic is scratched, there are no magnets in it so I can’t mount it, and it doesn’t work to connect it to the printer. They should have just waited a while longer to get things working.

techbabble:

#Prusa #Slicer
When telling Slicer that you want 100% of the print bed utilized, and you have brim checked, why does Slicer not compensate for the brim....?

(reply to yt comment)
Tbf, when you say #Prusa Loyalists. I'm not saying you're wrong; but I do feel like there's a lot of valid reasons why someone would prefer buying a prusa machine. They're the most open source 3D printing company around. They provide insanely long firmware updates. The customer support is excellent. It's built in Europe. They're upgradeable.
All of these things have costs associated with them. And for a lot of people including myself, that's a cost i'm willing to pay

If you have a Sovol SV08 and use PrusaSlicer, I made a custom bed shape and bed image for ya https://github.com/jefe317/sovol-sv08-prusaslicer-bed