mstdn.social is one of the many independent Mastodon servers you can use to participate in the fediverse.
A general-purpose Mastodon server with a 500 character limit. All languages are welcome.

Administered by:

Server stats:

13K
active users

#vendorlock

1 post1 participant0 posts today
Replied in thread

@cesarpose @mrmasterkeyboard depends on the model and #hp has something more sinister:

I literally had this with a client in the past and it's the reason a #refurbisher I know didn't offer RAM-#Upgrades for HP machines at all

Replied in thread

@bert_hubert Wat ik fascinerend vind is dat het nu alleen maar gaat over Amerikaanse providers versus Europese aanbieders. Vrije #opensource-software wordt in het hele artikel niet genoemd. Ik heb moeite met het in machtsblokken / unies denken. Wat mij betreft zou de focus op #FOSS en #selfhosting moeten liggen. Dan heb je pas #DigtaleSoevereiniteit en #DigitaleAutonomie. Veel #gemeenten hebben nu bijvoorbeeld ook een #vendorlock bij het Nederlandse #Centric. Dat is net zo problematisch.

Geht #Synology den Weg der #Druckerhersteller?

Die Firma beschränkt künftig die Kompatibilität seiner neuen #NAS-Modelle der Plus-Serie auf eigene oder zertifizierte #Festplatten.

Funktionen wie #Deduplizierung und automatische #Firmware-Updates sind nur mit diesen nutzbar. Nutzer*innen müssen mit höheren Kosten rechnen, erhalten laut Synology jedoch mehr Systemstabilität und Support. Geräte vor 2025 sind von der Änderung größtenteils ausgenommen.

golem.de/news/vendor-lock-plus

Golem.de · Vendor Lock: Plus-NAS von Synology nur noch mit eigenen HDDs kompatibel - Golem.deBy Oliver Nickel

Regarding latest changes in Bambu Lab firmware:

blog.bambulab.com/firmware-upd

Here's my complaint ticket to them with small changes removing some personal information.

> Hi.
>
> I'm writing you to let you know that I'm disappointed by recent changes in the firmware for your printers.
>
> This change doesn't affect what I am **currently** doing as a beginner 3D printing enthusiast. But I'm also advocating for ability to self-host automations and other stuff. I was also planning to check out possibilities of automation of my printer via self-hosted smart home solutions and using my printer without cloud.
> These changes indicate that the company moves in the direction I can't personally approve and support.
>
> When I was buying your product, I disliked that your firmware is proprietary and very cloud-oriented. But since you were advertising LAN-only mode, I decided to still try. I really liked the quality of your product. But if you're now moving in the direction of making usage of LAN mode and external tools less convenient, I personally will avoid buying your products in the future.
>
> I own an A1 and was thinking of buying P1S. But now I'm going to reconsider my choice if I don't see any changes.
> I was also planning to record an episode of my podcast to talk about 3D printing also recommending your products to beginners. But I'm going to reconsider that too unless something changes in a good way.
>
> This is not an ultimatum of any kind. It's just an honest feedback from your customer who was very glad with his purchase just yesterday and now thinks that he probably made a mistake.
>
> P.S. In my personal opinion, all restricting changes should be completely Opt-In so my printer won't force me to have "a better security" at the cost of my ability to use it as I want to. I was calling you "Apple of 3D printers, but in a good way" when talking with my peers. Now last part is probably going to change to "in a bad way". And I'm not an Apple user.
>
> Thank you for your time.

Now I'll be waiting for their response when they return from Chinese New Year holidays.

P.S. If you own a Bambu Lab printer and doesn't approve those changes, I recommend writing them ticket too.

Bambu Lab Blog · Firmware Update Introducing New Authorization Control SystemLaunching first for X Series printers, with P and A Series updates planned for future release
#Bambu#3D#printing

GNU/Linux/nvme-cli/Kingston/firmware

О чем эта статья Вендор NVMe дисков предоставлял пригодные для обновления прошивки под ОС GNU/Linux, но это изменилось. В статье разбираюсь с новым форматом прошивок и возвращаю возможность обновления.

habr.com/ru/articles/872210/

ХабрGNU/Linux/nvme-cli/Kingston/firmwareПредыстория Перед новогодними праздниками в RAID массиве «зеркало» состоящем из двух дисков Kingston SKC2500M8/250G отказал один. Логи ядра не сохранились. При попытке записи на диск система "висла" и...

Neckarsulmer IT-Dienstleister Bechtle zieht wieder Millionenauftrag an Land swr.de/swraktuell/baden-wuertt
Für mehr als eine halbe Milliarde Euro Steuergelder pumpt die Bundesregierung unser aller Daten in US-Unternehmen und begibt sich weiterhin breit und alt grinsend in den #Vendorlock.
Das wird mit ePA nicht arg viel anders sein.
Da kann man noch so viel von "Sicherheit" und "Effizienz" quarken.
#AWS #Cloud

SWR AktuellNeckarsulmer IT-Dienstleister Bechtle zieht wieder Millionenauftrag an Land - Cloud-Dienste für BundesverwaltungDer IT-Dienstleister Bechtle aus Neckarsulm hat den nächsten Großauftrag von der Bundesregierung erhalten. Für 235 Millionen Euro soll er Cloud-Dienste für die Verwaltung liefern.

@lamp I mean in terms of reliability.

  • I had cheap 3rd party RAM be unstable on me even at it's designated ratings...

Since then I'd rather pay a few cents more to get something more stable.

  • But that's just bias from past experiences...

Tho I wounder if one could easily reflash the SPD-EEPROM on those cheaper sticks to circumvent #VendorLock|s from like #hp #ProBook|s that will complain and demand to have F1 pressed every bootup when non-HP-branded sticks are installed!

Replied in thread

@mvilain @dangillmor @pluralistic yeah...

The only reason I still have my DeskJet 6122 hooked up is because that lil shit refuses to die!

  • Like its glycol ink refuses to clog and it's easy to refill and reset the cartridges...

  • Otherwise I would've already replaced it with a WorkCentre multifunction laser...

Worse are their #ProBook line of #Laptops: They literally "Soft-#VendorLock" their #RAM to #HP-branded sticks, bricking #PXE-boot and requiring people to manually press F1 on the device keyboard EVERY SINGLE BOOTUP / REBOOT with #FUD messages.

  • Unlike with like #WiFi and #WWAN chips where one can figleaf argue that those need allow-listing for "spectrum regulatory compliance", this doesn't apply to RAM!

On the flipside I use a bunch of #fanless hp #ThinClient|s as #MiniServers, but that's because in #Germany #electricity is absurdly expensive and for just doing #backups and #MediaSharing doesn't draw much power...

<rant>
Ok, it seems to me to be more and more difficult to buy ebooks. Wiley ? You endup needed a dedicated software (vitalsource), Oreilly ? You need a subscription and the oreilly app. Amazon ? Kindle.

And for people without macOS, Windows, or a Kindle, forget it.

Yes, I'm aware of DRM free ebooks, but sometimes you need or want a specific book which is DRM protected.
</rant>

I'm still not out of the rabbit hole of searching for an #OpenSource #PersonalKnowledgeManagement software. 🐰

I'm gonna give a second try to @zettlr tomorrow! Their docs are *surprisingly* user-friendly and they claim to stick to the pure #CommonMark where probable. It's all the while being nice to researchers with citing, inline usage of #TeXLaTeX, #MermaidJS, and pop-over #footnotes. Provision of the simple #PDF export and #Pandoc customization are welcome, too!

But, to be fair, I may be overexaggerating how good #Zettlr is because of my recent disgust with #VendorLocking. In fact, almost anything that closely follows the common spec and is #FreeSoftware might suffice already. Having something as advanced and closer to the roots is certainly refreshing!

На YouTube появился доклад тех самых трёх польских хакеров исследовавших странную блокировку поездов.

youtube.com/watch?v=XrlrbfGZo2

Занятное зрелище, интересные находки. Местами легко представить себе менеджера компании-производителя, который приходит к разработчикам с очередной великолепной идеей.

К слову, на всех трёх героев презентации можно подписаться в феди. Оставлю ссылки в первом комменте чтобы не втягивать их потенциально в тред.

@anarresti @Fairphone @frameworkcomputer Bzgl. bin ich nicht gut zu sprechen weil die mitels 'softem' "" auf machen:

Wenn das RAM nicht hp-branded ist brickt es -Boot und automatische Starts und wirft bei JEDEM (!!!) [Re-]Boot ne Bullshit-Fehlermeldung die stets manuell per F1 auf der Gerätetastatur ümnestätigt werden muss.

Ich finde das ne absolute Gängelung und -Maßnahme welche anders als z.B. Allowlistings für & keine valide Begründung hat!